Ascaso Dream PID Anthracite

Lever coffee machine with 1 circuit, thermoblock

The coffee maker has a single thermoblock and primarily heats up to coffee brewing temperature. To use steam, the coffee maker must be switched to steam and the temperature increase activated. At the same time, it is necessary to wait for the system to heat up and generate sufficient steam. You can then use the steam to whisk the milk. Then you must switch the system to espresso mode again to cool it down.

Single-barrel machines have a lower purchase price and, in combination with PID control, achieve a stable temperature. The main negative is waiting for the cooling/deaeration process. This is time-consuming for cappuccino preparation, where we linger for about 1.5 to 2 minutes compared to two circuits. Therefore, this coffee machine is the ideal choice for black coffee lovers, espresso drinkers who occasionally have coffee with milk foam.

PID temperature control

With the electronic temperature control and PID control you are able to set the temperature on the coffee machine in one degree increments, choose the sleep mode transition setting, set the coffee batch dispensing timer, set the pre-brew time from 9 to 5 seconds, display with error indication.

At the same time, thanks to the electronic steam control, you can ensure that the correct amount of water enters the heating system based on the temperature of the system, not the amount of water. The correct temperature is controlled by switching the pump frequency.