What is cupping and why should you care
Cupping is a standardized method of sensory analysis of coffee – a systematic way of tasting and evaluating samples under the same, repeatable conditions. It's not just a matter for professionals: cupping is the most precise tool for selecting beans that truly suit your palate, and understanding why.
The principle is deliberately simple. Ground coffee is poured with hot water directly in a cup, left to steep, and then aroma, flavor, acidity, body, sweetness, and overall impression are evaluated. No filter, no pressure, no espresso machine – just coffee and water. This simplicity is precisely what makes cupping universal: by eliminating variables associated with brewing method, you uncover the character of the bean itself. Whether you're comparing single origin from Ethiopia and Colombia, or verifying the quality of a fresh roastery shipment, cupping shows you the truth without distortion from a specific extraction method.
Cupping is used by roasters for quality control, importers for selecting green beans, baristas for developing sensory memory, and increasingly by home coffee enthusiasts who want to consciously understand what they're drinking. If you buy whole bean coffee and care about what's in your cup, cupping is a skill that will permanently change how you perceive coffee.
SCA cupping protocol – step by step
The Specialty Coffee Association (SCA) adopted new coffee evaluation standards in November 2024 called Coffee Value Assessment (CVA). They replaced the original 2004 protocol and introduced three separate standards: SCA 102-2024 (sample preparation and tasting mechanics), SCA 103-2024 (descriptive evaluation), and SCA 104-2024 (affective evaluation). The result is more accurate, less subjective evaluation with clearer separation between analytical phases.
Step 1 – Sample Preparation
- Coffee to water ratio: 5.5–6.0 g ground coffee per 100 ml water (tolerance ±0.1 g).
- Grinding: Medium-coarse – coarser than espresso, finer than French press. In size, comparable to coarse salt crystals. Grind immediately before pouring, maximum 15 minutes beforehand, to minimize loss of aromatic compounds through oxidation.
- Number of cups: Minimum 3–5 cups per sample – higher numbers increase the chance of detecting defects and inconsistencies between batches.
- Cups: Ceramic or glass, volume 200–260 ml, all identical in shape and material.
- Water: Temperature 93 °C (±1 °C), pH 6.5–7.5, total mineralization 75–250 ppm. Heavily chlorinated or distilled water will skew results.
Step 2 – Dry Aroma Evaluation (Fragrance)
Immediately after grinding, bring your nose to the ground coffee in the cup. Evaluate intensity and character: is the aroma floral, nutty, fruity, spicy? Note your first impression – dry aroma works with different aromatic compounds than wet aroma and will reveal important aspects of the coffee's profile that may be lost or changed when water is added.
Step 3 – Pouring and Aroma Evaluation (Aroma)
Pour the ground coffee with 93 °C water. Water should evenly saturate the entire surface of the coffee. A firm "crust" of ground particles will form on the surface. During the next 4 minutes, evaluate the aroma rising from the wet crust – simply bring your nose to the surface, do not break the crust.
Step 4 – Breaking the Crust
Exactly 4 minutes after pouring, take a cupping spoon and slowly drag it three times across the crust on the surface – moving away from you to the back edge of the cup. With each pass, bring your nose close to the surface and inhale deeply. At this moment, the most concentrated wave of aromatic compounds is released – this is one of the most informative moments of the entire cupping. Immediately note the character and intensity of the aroma.
Step 5 – Skimming the Grounds
After breaking the crust, carefully collect the foam and floating particles with two spoons. The goal is a clean surface – tasting without solid residue allows evaluation of texture and body without interfering factors.
Step 6 – Tasting
When the coffee cools to approximately 70 °C (about 8–10 minutes after pouring), begin tasting. Load the spoon and slurp loudly – it's not impolite, it's an intentional technique. Strong slurping disperses the liquid across your entire tongue and palate, maximizing contact with taste receptors and simultaneously transporting volatile aromatic compounds to the nasal cavity through retroolfaction, which significantly enriches the perceived flavor profile.
Evaluate at three temperatures:
- Hot (70 °C) – flavor, aftertaste, acidity
- Warm (60 °C) – body, sweetness, balance
- Cool (40 °C) – cup cleanliness, uniformity, overall impression. Many defects only appear at lower temperature, making this phase crucial for quality control.
Evaluation Form – What is Evaluated
The new CVA system (2024) divides evaluation into two separate areas: descriptive and affective. In practice, these sections complement each other – numbers provide comparable scores, descriptors capture the specific character of the sample.
Affective Evaluation (Quality)
| Category | What You Evaluate | Scale |
|---|---|---|
| Aroma | Intensity and quality of scent – dry and wet | 1–9 |
| Flavor | Overall taste experience: aroma + taste + textural perception | 1–9 |
| Aftertaste | Length and quality of the finish after swallowing | 1–9 |
| Acidity | Clarity, liveliness, type (citric, apple-like, wine-like) | 1–9 |
| Body | Weight and texture in the mouth (watery – creamy – syrupy) | 1–9 |
| Sweetness | Perceived natural sweetness | 1–9 |
| Overall | Subjective evaluation of the overall experience | 1–9 |
Key changes from the original form: CVA uses a 1–9 scale instead of the original 6–10, expanding room for differentiation of lower quality. Sweetness is evaluated as a full category with its own score – in the old system, it was only a binary yes/no. The "Balance" category was integrated into overall impression.
Descriptive Evaluation
In addition to numeric score, descriptors – specific taste and aromatic attributes identified in the sample – are recorded for each category. This is where the flavor wheel comes in as a reference vocabulary.
Flavor Wheel – A Map of Coffee Flavors
The SCA Coffee Taster's Flavor Wheel is a hierarchical visual tool organizing hundreds of taste and aromatic descriptors into a structured system. The current version dates from 2016 and was created in collaboration with SCA and World Coffee Research based on the scientifically-grounded Sensory Lexicon – each descriptor has a defined reference standard and intensity measurement method in the lexicon.
How to Use It
The wheel works from center to edge – from general to specific:
- Inner circle – 9 basic categories: Sweet, Fruity, Floral, Nutty/Cocoa, Spicy, Green/Vegetative, Sour/Fermented, Roasted, Other.
- Middle circle – subcategories. For example, "Fruity" divides into Berries, Dried fruit, Citrus, Other fruit.
- Outer circle – specific descriptors. "Berries" is concretized into blueberry, raspberry, blackberry, strawberry.
Practical example: You taste a coffee and perceive something fruity. The inner circle confirms: "Fruity." Narrow it down – citrus or berries? Berries. What type? Something between raspberry and blackberry. You write: "berry – raspberry, blackberry."
The flavor wheel doesn't tell you what you "should" taste. It's a vocabulary that helps name what you already perceive. The more cuppings you do, the more precisely and quickly you can identify descriptors and contextualize them.
Equipment for Cupping
Cupping doesn't require expensive equipment. Here's a complete list of what you actually need:
Essential
| Item | Specification | Note |
|---|---|---|
| Cupping cups | 200–260 ml, ceramic or glass | All identical; SCA recommends minimum 5 cups per sample |
| Grinder | Set to medium-coarse grinding | Clean between samples – grind and discard 2–3 g of the next sample |
| Cupping spoons | Deep, round, stainless steel | Larger spoon volume enables more effective slurping |
| Kettle with thermometer | Water at 93 °C, filtered | Mineralization 75–250 ppm; gooseneck kettle enables precise pouring |
| Scale | 0.1 g precision | Essential for consistent dose measurement |
| Timer | – | Precise adherence to 4-minute steeping is crucial |
| Evaluation form | SCA CVA form or custom | Printed on table – notes during cupping are more accurate than from memory |
Optional but Useful
- Expectoration bowl – when evaluating multiple samples, you spit rather than swallow, to prevent caffeine overload and maintain sensory sharpness
- Clean water and unsalted crackers – to neutralize flavor between samples
- Printed flavor wheel – in front of you for quick reference orientation
The foundation of any good cupping is quality whole bean coffee. For sensory analysis, single origin coffees are ideal, where terroir character manifests most distinctly. Try, for example, filter whole bean coffee from different regions and compare how they differ.
How to Organize a Cupping at Home
Home cupping is not the exclusive domain of professionals. It's a practical and engaging way to develop sensory memory, discover differences between origins, and systematically find coffees that truly suit you.
Preparation
- Select 3–5 coffees to compare. Ideally different origins (Ethiopia, Colombia, Brazil) or different roast levels of the same green coffee. Order whole bean coffee with distinctly different profiles – contrast makes identifying differences easier.
- Prepare 3 cups for each sample. Three cups will reveal inconsistencies and defects that might not be visible in a single cup.
- Weigh 11 g of coffee per cup (in a 200 ml cup with a 5.5 g/100 ml ratio).
- Grind immediately before pouring. Between samples, clean your grinder – grind and discard 2–3 g of the next sample to prevent mixing.
- Label cups with numbers or letters. For blind tasting, have someone else label and shuffle the order – you evaluate more clearly when you don't know what's in the cup.
Process
- Smell the dry coffee in each cup. Note your first impressions.
- Pour 93 °C water – all cups as quickly as one after another. Start the timer.
- Wait 4 minutes. During this time, evaluate wet aroma.
- Break the crust – three slow drags with the spoon, nose close to the surface of each cup.
- Skim the grounds from the surface.
- Taste from 70 °C downward. Slurp from the spoon. Switch between samples – comparison is more effective than evaluating one after another.
- Record scores and descriptors at each temperature phase.
Tips for Home Cupping
- Don't rush. Cupping takes 20–30 minutes. Flavor change as temperature drops is not a problem – it's part of the process and a source of valuable information.
- Start with obvious contrast. Ethiopia (floral, fruity) versus Brazil (nutty, chocolatey) – the difference is clear immediately and helps anchor reference points.
- Write everything down, even if you can't name what you taste. Even a note like "fruity, but not sure what" is valuable. After ten cuppings, your sensory vocabulary will expand dramatically.
- Invite friends. Group cupping is more engaging – everyone perceives different nuances and discussion expands your flavor repertoire faster than solo practice.
- Don't evaluate "objectively." Cupping isn't a correctness test. If you prefer nutty Brazil to floral Ethiopia, that's fine. The goal is to understand what you like and be able to name it.
Calibration – How to Become a Better Taster
Cupping is a skill and, like any skill, improves with deliberate, repeated practice. Here are proven methods for developing sensory ability:
- Regularity. One cupping per month is better than none, one per week will move you forward significantly. Frequency is more important than the length of individual sessions.
- Reference aromatic sets. The Le Nez du Café sensory oil set enables you to learn to name specific aromas in isolation, without the distracting context of an entire cup – this significantly accelerates your development.
- Calibration with others. If you have the opportunity, attend a public cupping at a roastery or café. Comparing your evaluation with that of experienced tasters reveals blind spots you wouldn't be aware of otherwise.
- Triangle test. Three cups – two identical, one different. Can you reliably identify the different one? This test deliberately trains sensory sensitivity and the ability to distinguish subtle differences.
- Blind tastings. When you don't know what's in the cup, you evaluate without preconceptions and associations connected to origin, price, or brand.
Frequently Asked Questions (FAQ)
What's the difference between cupping and regular tasting?
Cupping uses a standardized procedure – fixed ratio, temperature, time, and preparation method – so results are comparable across samples and tasters. Regular tasting depends on brewing method: espresso will emphasize different qualities than pour over or French press. Cupping isolates the character of the bean from the influence of extraction method.
Do I need special cupping cups?
Not necessarily. SCA recommends ceramic or glass cups with a volume of 200–260 ml. What matters is that they're all identical – same shape, material, and volume. Plain porcelain mugs without handles of the same size will work, as long as they're interchangeable.
How much coffee do I need for one cupping?
One cup requires about 11 g (in a 200 ml cup with a 5.5 g/100 ml ratio). For three cups of one sample, that's 33 g. Comparing five coffees uses approximately 165 g total. Cupping is an ideal opportunity to try smaller packages of various whole bean coffees without committing to larger quantities.
What if I don't taste anything specific?
A completely normal experience, especially at the beginning. Sensory memory develops gradually and needs reference points. Start with basic categories: is it more fruity or nutty? Sour or sweet? Light or heavy on the tongue? Every cupping trains your tongue and nose – after a few sessions, you'll automatically distinguish differences that initially seemed blurred.
Can I cup dark roasts?
Yes, cupping is suitable for any roast level. Dark roasts will have more pronounced roasted, chocolate, and caramel notes with suppressed fruity and floral nuances. It's particularly instructive to compare the same green coffee in light, medium, and dark roasts – cupping reveals how roasting transforms the bean's base character and which attributes it enhances or suppresses.
What is a Q Grader?
A Q Grader is a certified coffee quality evaluator licensed by the CQI (Coffee Quality Institute). Certification includes an intensive course and a series of exams in sensory analysis including triangle tests, identification of organic acids, evaluation of green beans, and cupping according to SCA protocol. Q Graders work on farms, at auctions, and in roasteries worldwide, and their evaluations serve as the basis for business decisions throughout the specialty coffee supply chain.
Resources
- Specialty Coffee Association. "Coffee Value Assessment – SCA Standard 102-2024" – sca.coffee/cva-102
- Specialty Coffee Association. "SCA Officially Adopts CVA Standards" – sca.coffee
- SCA. "Coffee Taster's Flavor Wheel" – sca.coffee/research/coffee-tasters-flavor-wheel
- SCA. "How to Use the Flavor Wheel in Eight Steps" – sca.coffee
- Coffee Quality Institute. "Q Coffee System" – coffeeinstitute.org
- Quality Life Coffee. "SCA CVA Standard Guide" – qualitylife.coffee
- Daily Coffee News. "SCA Officially Adopts New Cupping Forms" – dailycoffeenews.com


