How to Make Espresso: A Free 10-Lesson Course
In short: For a double espresso, put 14–20 g of finely ground coffee in the basket (7–10 g for a single) and aim for roughly double that in the cup, a ratio of 1:2 (18 g of coffee to 36 g of drink). Extraction should take 25–30 seconds from the moment you start the shot, the water should be at 90–96°C and the pressure at 9 bar. If you can’t hit the target time, change only the grind size.
The videos are in Czech. You can turn on automatic subtitles in the YouTube player and translate them into your language (the cog icon → Subtitles/CC → Auto-translate).
This course is for anyone who has a lever espresso machine at home and wants espresso that tastes just as good on a Monday as it does on a Saturday. You don’t need any prior knowledge, just a willingness to experiment and a bit of patience.
The course is free and consists of ten short lessons. Each one comes with a video, followed by text you can come back to any time. Your guide is Ing. Zdeněk Mareček, head roaster, who roasts, tastes and dials in recipes on coffee every day.
What you’ll need:
- a lever espresso machine (with a portafilter, not a fully automatic machine),
- an espresso grinder with burrs,
- a tamper matching the diameter of your basket,
- scales accurate to 0.1 g, ideally with a built-in timer,
- a knock box for used coffee pucks,
- a cloth for wiping the portafilter, a cup, a spoon and, of course, freshly roasted coffee.
Optionally, a distribution tool or a WDT (needle) tool for breaking up the coffee is useful, along with a tamping mat to rest the portafilter on while you tamp.
Lesson 1: Introduction
Good espresso needs two machines: the espresso machine and the grinder. In the video, Zdeněk uses a Victoria Arduino Eagle One Prima home espresso machine and a grinder from the same brand. Victoria Arduino is an Italian manufacturer of professional espresso machines, but the method you’ll learn in this course works on any lever machine with a portafilter.
Why such emphasis on the grinder? The machine supplies hot water under pressure, but how evenly and how quickly that water passes through the coffee depends mainly on the grind. A cheap machine paired with a good grinder will usually make better espresso than an expensive machine paired with a grinder that grinds unevenly.
Besides the two machines, you’ll need some small accessories:
| Tool | What it’s for |
|---|---|
| Tamper | presses the ground coffee in the basket into a flat, firm puck |
| Distribution tool or WDT tool | spreads the coffee in the basket evenly before tamping |
| Tamping mat | protects the counter and the portafilter, and lets the portafilter stand level |
| Scales with a timer | measure the dose, the yield and the time; without them, a recipe can’t be repeated |
| Knock box | a container you knock the used puck into |
| Cloths | for drying the portafilter and wiping the steam wand and the group head |
And the last, most important component: the coffee. In the video, Zdeněk uses a Brazilian coffee. For a start, a medium-roast coffee roasted for espresso is a good choice, since it’s easier to dial in. If you’re not sure which one to pick, try a quiz to find the coffee that suits you.
For an overview of other equipment and what to look out for when buying it, see our article on essential accessories for a lever espresso machine.
Try this: Go through the table and check what you already have at home. If you’re missing scales, get them first – without them, the rest of the lessons are just guesswork.
Lesson 2: Espresso Basics
Espresso is a method of making coffee in which hot water passes through a layer of finely ground coffee under high pressure in a short amount of time. The result is a small, dense, concentrated drink with foam on top.
Here are the basic parameters you’ll come back to throughout the course:
| Parameter | Single espresso | Double espresso |
|---|---|---|
| Dose of ground coffee | 7–10 g | 14–20 g |
| Yield (finished drink) | roughly double the dose, around 25–30 ml | roughly double the dose, e.g. 36 g from 18 g |
| Ratio | 1:2 (typically 1:1.5 to 1:2.5) | 1:2 (typically 1:1.5 to 1:2.5) |
| Extraction time | 25–30 s | 25–30 s |
| Water temperature | 90–96°C | 90–96°C |
| Pressure | 9 bar | 9 bar |
In the video, the extraction time mentioned is 20–30 seconds. In lesson 8, Zdeněk works with 25–30 seconds, and that’s the range this course is based on.
Use filtered or otherwise treated water for espresso. Hard water scales up the machine and changes the flavour, while water that’s too soft gives a flat cup. You’ll find more detail in our article on water for espresso machines.
A Brief History of Espresso
For a long time, coffee was made by boiling or steeping. The first machine to use pressurised steam for brewing was patented by Angelo Moriondo of Turin in 1884. In the early 20th century, Luigi Bezzera followed with a patent in 1901, and Desiderio Pavoni bought that patent and began manufacturing the machines in series. However, these machines worked with steam pressure of around 1.5 bar, and the coffee they produced was strong and often scorched.
The real breakthrough came from Achille Gaggia. The video mentions 1940, though the documented dates differ: Gaggia filed a patent for his piston system in 1938 and brought a spring-piston lever machine to market in 1947–1948. The barista pulled the lever, cocking a spring, which then forced water through the coffee at a pressure of roughly 8–10 bar. This is when crema first appeared, and it’s also where the phrase ‘pull a shot’ comes from.
The next step came in 1961, when Faema launched the E61. An electric pump created the pressure instead of a lever, water was heated in a heat exchanger inside the boiler, and the group head kept a stable temperature through thermosiphon circulation. The E61 group head is still used in home espresso machines today.
Types of Home Espresso Machines
- Single-boiler machines: one boiler for both espresso and steam; you have to switch between making coffee and steaming milk, and wait in between.
- Heat exchanger (HX) machines: the boiler maintains the temperature for steam, and the water for coffee is heated as it flows through a pipe inside the boiler. You can make coffee and steam milk at the same time.
- Dual-boiler and multi-boiler machines: a separate boiler for coffee and another for steam, each set to its own temperature. Water temperature for espresso is the most stable here. The first dual-boiler machine, the La Marzocco GS, was introduced back in 1970, though these machines have only become common in homes in recent years.
- Manual, pump-free machines: you generate the pressure yourself through a lever (for example, the Flair or the La Pavoni), while spring-piston lever machines deliver pressure via a spring once the lever has been cocked.
For more on how water and steam move through the machine, see our article on how a lever espresso machine works.
Crema
Crema is the golden-brown foam on top of an espresso. It forms because water under high pressure dissolves carbon dioxide left in the coffee after roasting. Once the pressure is released, the gas escapes as tiny bubbles, which combine with emulsified coffee oils to form the foam. The video refers to air bubbles, but in reality they’re mainly carbon dioxide bubbles. Crema gives espresso its characteristic look and texture, and it says a lot about how fresh the coffee is. More in our article on espresso and its crema.
Try this: Find out what type of machine you have and how long it takes to heat up. Before making your first espresso, always let it heat up fully, with the portafilter locked into the group head.
Lesson 3: What Extraction Is
Extraction is the process by which water dissolves and washes flavour-forming compounds out of ground coffee: acids, sugars, bitter compounds and other substances. Coffee oils pass into the drink as an emulsion. Water acts as the solvent here. If no extraction took place, you’d just have hot water in your cup.
These compounds don’t come out of the coffee all at once. Acids dissolve first, then sugars, and bitter and astringent compounds come out last. That’s why extraction time and evenness matter so much:
- Under-extracted espresso (the water pulled too little from the coffee): sour, sharp, salty, with a short, thin finish.
- Over-extracted espresso (the water pulled out more than you want): bitter, ashy, astringent and drying in the mouth.
- Balanced espresso: sweetness, acidity and bitterness are in balance, and the flavour lingers.
Why does the grind matter so much? Zdeněk demonstrates it with an example: if you drop a whole coffee bean into a glass of hot water, only its surface gets extracted. The bean is dense and has a small surface area relative to its volume, so water can’t reach inside it quickly. Grind the same amount of coffee, though, and the surface area multiplies, so extraction happens fast.
It’s just as important for all the particles to be a similar size. Fine particles extract quickly, coarse ones slowly. If your grinder grinds unevenly, you end up with both over-extracted and under-extracted coffee in the same cup, and the flavour is sour and bitter at the same time.
A useful comparison is roasting vegetables. Before you put them in the oven, you cut them into equal-sized pieces and spread them out on the tray. Otherwise, the small pieces burn while the large ones stay raw. The same is true for coffee: an even grind and coffee evenly distributed in the basket.
If you want to go deeper (extraction yield, TDS, the ideal range of 18–22%), you’ll find it all in our article on the coffee extraction process.
Try this: Make two espressos, one noticeably shorter (a 1:1 ratio) and one longer (1:3). Compare them side by side. You’ll quickly learn to recognise what acidity and what bitterness taste like.
Lesson 4: The Coffee Puck
The coffee puck is the layer of ground, tamped coffee in the portafilter basket. It acts as resistance for the water. When the puck is level and equally dense throughout, it offers the same resistance across its whole surface, and water passes through it evenly. That’s what even extraction depends on.
If the puck has a weak spot (less coffee there, a crack, an uneven surface), the water will find it and flow through faster. This is called channeling. Part of the coffee ends up over-extracted, the rest stays under-extracted, and the espresso tastes sour and bitter at the same time. More on this in our article on the problem of channeling.
A good puck depends on three things: the grind, the distribution and the tamping. All three take a bit of practice, and we’ll go through each one in the lessons that follow.
How to Spot a Good Extraction by Eye
You can tell the puck is in good shape while the shot is still pulling:
- After starting the shot, nothing flows for a moment, as the water first saturates the coffee.
- The first drops appear roughly between the 3rd and 8th second, depending on the machine and whether it has pre-infusion.
- The drops merge into a continuous, thin stream that flows evenly the whole time, without spraying to the sides.
- At the start, the espresso is dark, dense and syrupy, then it lightens to a hazelnut colour.
- In the final phase, the stream fades to a pale, blond shade. That’s when you’re nearing the end of the shot.
All three phases together make up the final flavour, which is why you should always stir espresso before tasting it.
If you have a bottomless portafilter, you’ll see channeling directly: pale spots, spurts, or a stream coming from only one part of the basket.
To be able to compare results, you need a good puck plus fixed rules, something measurable to follow every day. That’s the espresso recipe, which lesson 8 covers.
Try this: Next time you make espresso, watch which second the first drops appear and whether the stream flows straight. Write it down along with the time and the yield.
Lesson 5: Distribution and Tamping
When you grind coffee into the basket, it usually forms a small mound. Before you tamp it, you need to spread it out, otherwise there’ll be more coffee in one spot and less in another. This is called distribution.
Distribution
There are several methods. Zdeněk prefers tapping the side of the portafilter with the palm of his hand, which moves all the coffee in the basket, not just the surface. Other options include:
- a distribution tool (a tool with blades that levels the coffee as you turn it), useful if you struggle with evenness in the long run,
- a WDT (needle) tool, which you use to stir the coffee in the basket and break up any clumps – see our article on distributing coffee with a WDT tool.
Tamping Step by Step
- Stand the portafilter on a level mat or the edge of the counter.
- Hold the tamper the way you’d hold a kitchen knife: the handle resting loosely in your palm, thumb and index finger on the edge of the base.
- Stand to the side of the portafilter, keep your elbow above the tamper and your arm bent at roughly a right angle. The pressure should come through your arm, not your wrist – keep your wrist straight.
- Insert the tamper level into the basket. Your thumb and index finger act as a guide to keep the base horizontal.
- Press down until you feel the coffee stop compressing.
- Lift the tamper straight up carefully, so you don’t disturb the puck. Don’t twist it or tap it against the portafilter.
Good posture matters most for baristas who pull hundreds of shots a day, but we recommend it at home too. If you repeat the same movement every time, it’s easier to tell what changed the result.
How Much Force
You’ll find all sorts of numbers online. The video mentions 30–40 kg, but that’s more than you actually need. A figure of 30 lb, or roughly 14 kg, is often quoted, and in practice we work somewhere between 10 and 20 kg. Don’t stress over this: beyond a certain point, coffee simply stops compressing further, so extra force has no effect on extraction. What matters more is pressing with the same force every time and keeping the puck level. More detail in our article on the coffee tamper: how to tamp correctly.
Common Mistakes
| Mistake | What happens |
|---|---|
| No distribution | there’s more coffee in one spot, water flows around it and passes through faster elsewhere |
| Unevenly tamped puck | water flows most where the coffee layer is thinnest |
| Rough handling of the portafilter after tamping | the puck cracks or separates from the wall, and water flows through the gap |
If you notice the puck isn’t level, don’t panic. Pull the shot, taste it, and focus on keeping it level next time you tamp.
Try this: Stand at the counter following the steps above and tamp three doses in a row. After each one, check from the side whether the puck’s surface sits at the same height all the way across the basket.
Lesson 6: The Coffee Grinder
The grinder is the tool you’ll use to dial in espresso every day. With practice, you’ll learn what to do when you need to lengthen or shorten the extraction time.
Burrs, Not Blades
Grinders come in two types: burr grinders and blade grinders. A blade grinder chops the coffee rather than grinding it, producing a mix of dust and large chunks. For espresso, you need a grinder with quality steel or ceramic burrs that grinds consistently.
Grind size is set by the distance between the burrs:
- burrs closer together = finer grind = slower flow and longer extraction,
- burrs further apart = coarser grind = faster flow and shorter extraction.
Stepped or Stepless Adjustment
| Adjustment | How it works | Who it’s for |
|---|---|---|
| Stepped | the grinder has fixed settings with numbers; you set a number | anyone who switches between espresso and filter and wants to return quickly to a proven setting; fine-tuning espresso is more limited, though |
| Stepless (micrometric) | a dial or collar turns freely with no clicks | anyone who wants to dial in espresso in small increments |
In the video, Zdeněk uses a grinder with stepless adjustment. On some of these, the dial can turn a full 360°, even several times over, so the numbers on the scale don’t indicate an absolute grind size. They’re mainly there for reference: a lower number usually means finer, a higher one coarser.
How to Adjust the Grind
Example: your espresso takes 20 seconds and you want 26. You need to extend it by 6 seconds, meaning grind finer. Turn the setting slightly towards a finer grind. On Zdeněk’s grinder in the video, that’s clockwise, towards a lower number, though on other grinders it may be the other way round. Check the arrow or scale on your own model.
After every adjustment, it’s a good idea to grind one dose and discard it. Some coffee ground at the previous setting stays inside the grinder (retention) and would still show up in the result. Only the next dose will show whether you’re getting closer to your target.
Our article on coffee grind size covers what to focus on when adjusting the grinder, and our article on espresso grinding mistakes covers specific problems.
Try this: Work out which direction makes your grinder grind finer, and test how many seconds the extraction time changes after one small step. Don’t forget to discard one dose after each change.
Lesson 7: Factors That Affect the Grind
Even with the grinder set and your recipe dialled in, espresso can start behaving differently within a few days. Three things are usually behind this: the age of the coffee, how it’s stored, and the roast level.
Coffee Age
The roast date is printed on the bag and is one of the most important pieces of information. After roasting, coffee gradually releases carbon dioxide. Freshly roasted coffee has a lot of it, and espresso made from it tends to be uneven, with bubbly crema. That’s why it needs to rest, roughly 5–7 days for espresso. It then usually performs best for about 2–3 weeks after roasting, and Zdeněk prefers using it for espresso in the second and third week.
The older the coffee, the more gas it has already released. The crema is weaker and the espresso can taste flat and watery, even with perfect equipment. Older coffee also tends to flow faster, so over time you’ll need to grind it a touch finer. More on resting coffee in our article on freshly roasted coffee and degassing.
Try espresso from the same bag day after day. You’ll see how both the flavour and the time change.
Storage
Five things damage coffee: moisture, heat, oxygen, light and time. What helps:
- a resealable bag with a one-way valve, or a vacuum container,
- pushing out as much air as possible through the valve every time you open the bag,
- storing coffee away from appliances that give off heat (oven, espresso machine, the back of the fridge) and away from direct light.
You’ll find a detailed guide in our article on how to store coffee.
Roast Level
Light-roast and dark-roast coffee differ both physically and chemically. The longer coffee is roasted, the more density it loses, becoming more brittle and porous, and the more easily compounds dissolve out of it.
| Roast | Grind | Why |
|---|---|---|
| Lighter | usually finer | the bean is denser and harder to extract |
| Darker | usually coarser | the bean is more brittle, so soluble compounds release faster |
Our article on the differences between coffee roast levels describes how they show up in the cup.
Try this: Note down the roast date of your coffee, and each day you make espresso from it, record the extraction time at the same grinder setting.
Lesson 8: The Espresso Recipe
An espresso recipe has three components: dose, yield and time. They determine the final flavour, and you have control over all three.
Dose
The dose is the amount of ground coffee in the basket. It’s determined by the size of the basket, which is usually stamped on it or listed in the manual:
| Basket | Typical dose |
|---|---|
| Single | 7–10 g |
| Double | 14–20 g, most commonly 16–18 g |
| Triple | around 20–22 g |
In the video, Zdeněk uses a 20 g basket. Always weigh your coffee – accuracy is the basis of repeatable results. You can also tell a correctly filled basket by the puck: once the portafilter is locked in, the coffee shouldn’t touch the shower screen, and after extraction, you don’t want to see an imprint of the screen’s screw on the puck. If you do, the dose is too large for that basket.
Tamping follows on from the dose, and that’s covered in lesson 5. Roughly 10–20 kg of pressure is enough, as long as it’s consistent and level.
Yield
The yield is the weight of the finished drink in the cup. It’s measured in grams, not millilitres, because crema distorts volume and grams are more accurate.
The default ratio is 1:2:
- 20 g of coffee → 40 g of espresso (double),
- 18 g of coffee → 36 g of espresso,
- 8 g of coffee → 16 g of espresso (single).
A shorter ratio (1:1.5) gives a denser, more intense espresso, while a longer one (1:2.5) gives a lighter, cleaner cup. You can work out the yield for a different dose or brewing method using our article on how much coffee per cup.
Time
Espresso should be ready in 25–30 seconds. You measure the time from when you start the pump to when you stop the extraction, not from the first drops. Both a flow that’s too fast and one that’s too slow will make the espresso worse.
How to Work With the Recipe
To start with, keep two values fixed: the dose and the yield. Leave time as the only variable. In practice, for espresso, time is essentially a stand-in for grind size:
- extraction is too fast → grind finer,
- extraction is too slow → grind coarser.
It’s as simple as that. Repeat the recipe over and over until you can do it without thinking. For step-by-step fine-tuning, our guide on how to make the perfect espresso is also useful.
Try this: Write your recipe down on paper (for example, 18 g → 36 g in 25–30 s) and stick to it for five days in a row. Change only the grind.
Lesson 9: Step by Step
Now let’s put it all together. The whole process needs to be simple and consistent every time – that’s the only way to get repeatable results.
- Heat up the machine. Leave the portafilter heating in the group head.
- Clean and dry the portafilter. Take it out, knock out any leftover coffee and wipe the basket dry with a cloth. Old coffee residue and moisture will spoil both the flavour and the flow.
- Flush the group head. Run water from the group head for a few seconds to rinse coffee residue off the shower screen.
- Weigh the dose. Put the portafilter on the scale, zero it, and grind your dose into it according to the recipe.
- Distribute and tamp the coffee as described in lesson 5.
- Insert the portafilter. Slide it into the group head and turn it clockwise until you feel it seat. Don’t overtighten it; it doesn’t need to be perfectly centred to seal properly.
- Start the extraction right away. As soon as the portafilter is in the group head, the coffee starts heating up from the hot head. Don’t wait – put the cup on the scale and start the shot.
- Measure both weight and time. Start the timer on the scale the moment you start the pump.
- Stop at your target yield. When the scale shows the value that matches your 1:2 ratio (for example, 36 g from 18 g), stop the extraction. Write down the time.
- Stir and taste. Stir the espresso with a spoon so all the phases of the extraction combine, then taste it.
After brewing, knock the puck out into the knock box, wipe the basket and give the group head a quick flush. This keeps the machine ready for the next cup and stops residue building up in the head. More on machine care in our article on cleaning accessories for lever espresso machines.
If you’re still choosing a set of scales, you’ll find a comparison in our article on how to choose barista scales.
Try this: Make espresso by following the ten steps exactly, and for each cup, write down the dose, yield, time and grinder setting. After a week, you’ll see what works.
Lesson 10: How Espresso Should Taste
Once you’ve followed the recipe, the best part comes: tasting. At home, you’re both the barista and the guest, so you can adjust the recipe exactly to your own taste. Taste is subjective, but there are rules that help you tell whether you’re getting the best out of a given coffee. Developing a feel for flavours and nuance takes time, patience and practice.
Under-Extracted Espresso
The coffee wasn’t extracted enough. It tastes sour, sharp, even aggressive, and has a short finish. Your lips may pucker, and the sourness fades quickly. This is most often caused by an extraction that’s too fast. More in our article on why coffee tastes sour.
Over-Extracted Espresso
Espresso that’s been extracted for too long feels more tolerable to many people than a sour one, but it wears you down. It’s bitter, ashy and leaves an astringent, drying sensation in the mouth. This is most often caused by an extraction that’s too slow. More in our article on why coffee tastes bitter.
Balanced Espresso
The goal is a balanced extraction: sweetness, pleasant acidity and bitterness are all in balance, the espresso has a full body, and the flavour lingers. An extraction that’s too fast leads to sharp, sour notes, while one that’s too long leads to bitter aftertaste. You get good flavour by combining the right time with a good grind.
Every cup is a chance to improve. Experiment with the grind, the extraction time and the ratio, and above all, enjoy it. The final flavour of an espresso always comes down to four things: the machine, the grinder, you as the barista, and good-quality coffee.
Once you’ve mastered espresso, milk is the next step. You’ll find the basics of steaming milk and your first latte art patterns in our latte art guide.
Try this: Using the same coffee, make three espressos with yields of 30 g, 36 g and 42 g, all at the same 18 g dose. Taste them side by side and pick the one you like best. That’s your recipe.
Espresso Troubleshooting Table
| What you notice | Likely cause | Adjustment |
|---|---|---|
| Sour, sharp, short finish | under-extraction: too coarse a grind, short time or small yield | grind finer, or extend the yield (1:2 → 1:2.5); check that the machine is fully heated |
| Bitter, ashy, astringent | over-extraction: too fine a grind, long time or large yield | grind coarser, or reduce the yield (1:2 → 1:1.8) |
| Fast extraction (under 20 s) | coarse grind, small dose, channeling from poor distribution or tamping | grind finer, check the dose on the scale, pay attention to distribution and level tamping |
| Slow extraction (over 35 s) | too fine a grind, too large a dose for the basket | grind coarser, or reduce the dose by 0.5–1 g |
| Sour and bitter at the same time | uneven extraction, channeling | improve distribution (WDT), tamp level, check the grinder and how clean the basket is |
| Watery, weak crema | old coffee or too small a dose | check the roast date, increase the dose or reduce the yield |
Many other common problems are covered in our article on 10 espresso-making mistakes.
Frequently Asked Questions
How Many Grams of Coffee Should I Use for Espresso?
7–10 g for a single espresso, 14–20 g for a double, depending on the basket size. At home, a double basket with a dose of 16–18 g is most common. Always dose by weight, not with a scoop.
How Long Should Espresso Extraction Take?
Roughly 25–30 seconds from starting the pump to stopping it. If the espresso finishes sooner than that, grind finer. If it takes longer, grind coarser.
What’s the Right Coffee-to-Water Ratio for Espresso?
The default is 1:2 – 36 g of drink from 18 g of coffee. The typical range is 1:1.5 to 1:2.5. A shorter ratio gives a denser espresso, a longer one a lighter, cleaner cup.
Why Is My Espresso Sour?
Most often it’s under-extracted: the coffee is ground too coarse and the water passes through too fast. Grind finer, or extend the yield. An insufficiently heated machine can also cause sourness.
Do I Really Need Scales for Espresso?
Yes. Without scales, you don’t know how much coffee you dosed or how much espresso you pulled, and you can’t repeat or dial in a recipe. A simple set of scales accurate to 0.1 g is enough, and a built-in timer is a big advantage.
Sources
- Espresso machine – Wikipedia (history: Moriondo 1884, Bezzera 1901, Faema E61 1961, the first dual-boiler machine, La Marzocco GS, 1970)
- Espresso – Wikipedia (extraction parameters, crema composition, steam-machine pressure of around 1.5 bar)
- Gaggia – Wikipedia (patent application 1938, company founded 1947–1948)
- E-61 – Wikipedia (Faema E61 1961, electric pump, thermosiphon)
Updated: 27 September 2026


