Skip to content

V60 pour over – how to prepare perfect filtered coffee step by step

· Jakub · 15 min read

In short: For a V60 pour over, use 15 g of medium-fine coffee and 250 g of water at 93–96 °C (ratio about 1:16.7). Bloom with 30 g of water for 45 seconds, pour to 150 g by 1:15 and to 250 g by 1:45, then stir and swirl. Total brew time should be 3:00–3:30.

Coffee dose15 g
Water250 g (ratio 1:16.7, 60 g/l)
Water temperature93–96 °C
Grind sizemedium-fine, 400–700 microns
Blooming30 g water, 45 seconds
Total brew time3:00–3:30

Why V60 is the king of filtered coffee

Hario V60 is at first glance an unassuming piece of glass, ceramic, or plastic – a conical dripper with 60-degree angled walls. Yet it is the most widely used pour over dripper in the world. You'll find it in the hands of World Brewers Cup champions, in cafés from Tokyo to Copenhagen, and in households where coffee is taken seriously.

The reason is no accident. The spiral ribs on the inner walls create an air channel between the paper filter and the dripper wall – the filter doesn't stick, air can flow freely, and water percolates through the coffee bed evenly from top to bottom. The large opening at the bottom gives the barista direct control over extraction rate: grind size, water temperature, pouring speed and technique – every change shows up immediately in the cup, without dampening and without distortion.

This guide walks you through Hoffmann's "Ultimate V60 Technique" supplemented with parameters from SCA (Specialty Coffee Association) standards and insights from Scott Rao and Tetsu Kasuya. If you follow it, you'll achieve at home one of the cleanest and most aromatically complex cups of coffee possible without professional equipment.


What you need – equipment checklist

Consistent brewing begins with consistent setup. Prepare everything within reach before you even heat the water.

  • Hario V60 dripper (size 02 for 1–4 cups) – see our drippers
  • Paper filters compatible with your dripper size – V60 paper filters
  • Grinder with adjustable settings (manual or electric) – coffee grinders
  • Digital scale with 0.1 g precision and integrated timer – digital coffee scales
  • Gooseneck kettle for controlled water flow – gooseneck kettles
  • Freshly roasted whole bean coffee – ideally 7–28 days from roasting – whole bean filter coffee
  • Thermometer (if not integrated into your kettle)
  • Server or cup for serving

Precise brewing parameters

The following table summarizes recommended parameters for standard V60 brewing according to Hoffmann's method in line with SCA standards.

Parameter Value Note
Coffee-to-water ratio 1 : 16.7 (60 g/l) SCA recommends 1 : 16–1 : 18; Hoffmann works with 60 g per liter
Coffee dose 15 g For one large cup (~250 ml)
Total water volume 250 g Including water for blooming
Water temperature 93–96 °C Light roast: 95–96 °C; medium: 93–94 °C
Grind size Medium-fine (400–700 microns) Comandante C40: 20–25 clicks; 1Zpresso JX: 2.5–3 rotations; Baratza Encore: setting 12–16
Total brew time 3:00–3:30 From first pour to last drip
TDS (Total Dissolved Solids) 1.15–1.35 % SCA Gold Cup Standard
Extraction 18–22 % Optimal range for balanced flavor profile
Water quality 75–150 ppm minerals SCA optimum: 150 ppm total dissolved solids

Note on grinding: Click counts are orientational – each grinder has a slightly different zero point and wear level. Go by resulting brew time: if shorter than 2:30, grind finer; if over 4:00, grind coarser. Time is a more reliable indicator than the grinder setting alone.


Step-by-step brewing – Hoffmann's method

James Hoffmann, holder of the World Barista Champion title (2007) and author of The World Atlas of Coffee, published his "Ultimate V60 Technique," which has become the de facto standard for home pour over brewing. The following procedure applies to 15 g coffee and 250 g water.

Step 1 – Rinse the filter

Insert the paper filter into the dripper and rinse it thoroughly with hot water. This achieves two things: it removes the paper taste from the fibers and preheats both the dripper and server below it. Always discard the rinse water.

Why it matters: An unrinsed filter imparts a subtle paper note that suppresses floral and fruity aromatic compounds – precisely those you're buying quality single origin beans for. This step takes ten seconds and is free.

Step 2 – Grind the coffee

Grind 15 g of coffee to a medium-fine consistency – visually something between table salt and coarsely ground sea salt, roughly 500–700 microns.

Approximate settings for common grinders:

  • Comandante C40: 20–25 clicks
  • Comandante C40 with Red Clix: 46–57 clicks
  • Timemore C2 / C3: 18–22 clicks
  • Baratza Encore: setting 12–16
  • Wilfa Svart: between "filter" and "aeropress" symbols

Pour the ground coffee into the dripper and level the bed by tapping gently against your palm. Use your finger to create a small crater in the center – the "bird's nest." This depression helps water saturate the entire bed evenly during blooming without water running only down the sides.

Step 3 – Blooming (pre-infusion) – 0:00 to 0:45

Pour 30 g of water (double the coffee weight) in a slow circular motion from the center outward, ensuring the entire coffee bed is evenly saturated. Immediately after pouring, gently rotate the dripper – 2–3 smooth wrist rotations ensure no part of the bed remains dry.

What happens: Freshly roasted coffee contains CO₂ that rapidly escapes when contact with hot water – you'll see this as characteristic blooming and swelling of the bed. If you don't give the gas time to escape before main extraction, it creates a barrier between water and coffee particles and prevents even flavor extraction. Forty-five seconds is sufficient.

Freshness indicator: Vigorous blooming signals fresh coffee. Flat, non-reactive coffee is either old (more than 5–6 weeks from roasting) or pre-ground with CO₂ already escaped.

Step 4 – First pour – 0:45 to 1:15

Begin pouring water in slow, controlled circular motions from the center outward and back. The goal is to reach 150 g on the scale (60% of total volume). Pour continuously over the full 30 seconds.

Pouring technique: The water stream should be thin and stable – roughly the thickness of a thick pencil. A gooseneck kettle gives you the precision a regular kettle never will. Don't pour all the way to the filter edge – stay at least 1 cm from the paper wall. Water flowing directly along the filter bypasses the coffee bed and brings nearly unextracted, diluted liquid into the cup – so-called bypass – which impoverishes the resulting profile.

Step 5 – Second pour – 1:15 to 1:45

Using the same technique, add the remaining 100 g of water to reach 250 g total on the scale. Pour as smoothly and evenly as in the previous step.

Why two pours instead of one? Splitting the volume into two phases prevents the coffee bed from being flooded with too much water at once. Water has time to penetrate better to all coffee particles, extraction temperature remains more stable, and the resulting cup is better balanced.

Step 6 – Stirring and swirl

After completing the final pour, make one clockwise rotation with a spoon and one counterclockwise. This dislodges coffee grounds that stuck to the filter walls, back into the bed – every particle should be in contact with water, not hanging on the paper.

Then grab the dripper and perform a gentle swirl – one smooth circular motion. This distributes the bed into an even, flat layer. An even bed means water percolates through all coffee layers at the same rate and no part is either under-extracted or over-extracted.

Step 7 – Dripping and total time

Allow the water to flow freely through the coffee bed without further intervention. Total time from first pour (including blooming) should be 3:00 to 3:30.

Check the coffee bed when finished: the surface should be flat, without dark "islands" of unextracted coffee or visible channels. If you see these defects, the coffee bed suffered from channeling – water found preferred paths and extraction was uneven.

Stir the coffee in the server, let it cool 1–2 minutes to drinking temperature (60–65 °C), and enjoy it without rush.


Troubleshooting – when something isn't right

Problem Likely cause Solution
Too sour, lemony, sharp taste Under-extraction Grind finer (1–2 clicks); raise water temperature by 1–2 °C; extend blooming to 50–60 s
Too bitter, ashy, burnt Over-extraction Grind coarser (1–2 clicks); lower water temperature by 1–2 °C; pour less aggressively
Watery, weak, no body Low coffee ratio or bypass Increase dose (try 1 : 15 ratio); ensure water doesn't flow directly down the filter wall
Too fast brewing (under 2:30) Too coarse grind Grind finer; verify dose accuracy on scale
Too slow brewing (over 4:00) Too fine grind or clogged filter Grind coarser; stir less aggressively during blooming; try different filter brand
Uneven, muddled flavor Channeling – water finding the easiest path Slow down and even out pouring; carefully level the bed before blooming; always finish with swirling
Coffee doesn't bloom Old coffee with low CO₂ Use fresher beans (7–21 days from roasting); shorten blooming to 30 s

Advanced tips for experienced brewers

Rao Spin – technique by Scott Rao

Scott Rao popularized the technique of gentle dripper rotation immediately after each pour. Centrifugal force evenly redistributes water in the bed, pushes it out of existing channels, and forces it to penetrate previously less-extracted areas. The result is measurably more even extraction.

Important warning: Too aggressive a swirl can push fine coffee particles (fines) into the paper filter's pores. Clogging the filter paradoxically slows flow, increases extraction, and brings bitter notes. One calm wrist motion is enough – force is not the goal.

Bypass brewing – controlled dilution

Bypass brewing works on the principle of separating cup strength from extraction degree. You brew a more concentrated coffee with less water – for example, 15 g coffee to 200 g water (1 : 13 ratio) – and after brewing is complete, add clean hot water to reach the desired 250 g.

The resulting coffee has the same strength (TDS) as standard brewing but a different sensory profile: more sweetness, cleaner finish, and fewer bitter notes. The principle is simple – smaller extraction water volume carries a higher proportion of desired aromatic compounds, and subsequent dilution reduces TDS without increasing extraction.

Ice V60 – Japanese flash-chilled method

The Japanese flash chilling method is the fastest way to obtain first-rate iced filtered coffee – without waiting for cold brew and without compromising on flavor.

Recipe (1 serving):

  1. Add 80 g ice to the server
  2. Grind 15 g coffee slightly finer than usual (Comandante: 18–20 clicks)
  3. Brew V60 using the standard procedure, but reduce total hot water to 170 g – the ice in the server replaces the remaining 80 g
  4. Pour the finished coffee directly over the ice and stir gently

Hot water extracts the full aromatic profile; immediate cooling "freezes" it in the same second and preserves it. The result is dramatically richer and cleaner than any cold brew prepared cold.

Kasuya 4:6 method – for experimenters

Tetsu Kasuya, 2016 World Brewers Cup champion, built his method on an elegant principle: the first 40% of water determines the balance between acidity and sweetness, the remaining 60% defines cup strength. The entire brew is divided into five equal pours.

The following table applies to 20 g coffee and 300 g water:

Pour Time Volume Cumulative volume
1 (blooming) 0:00 60 g 60 g
2 0:45 60 g 120 g
3 1:25 60 g 180 g
4 2:05 60 g 240 g
5 2:35 60 g 300 g

Total time: approx. 3:30. Grind: coarser than Hoffmann's method (Comandante: 26–30 clicks), because five pours create more turbulence than two. Want more sweetness? Lower the first pour to 50 g and raise the second to 70 g – this extends contact time in the first phase and emphasizes sweet notes.


V60 is designed so coffee has nowhere to hide – every origin nuance, every processing detail ends up in the cup. That's why it works best with coffees where you want to appreciate floral, fruity, and tea-like notes that espresso under high pressure would partially suppress.

Ideal profiles for V60:

  • Ethiopian single origin – floral (jasmine, bergamot), citrus, tea notes; washed process brings crystal clarity, natural processing offers berry sweetness and winey finish
  • Kenyan coffee – currant acidity, juicy body, characteristic tomato and blackcurrant notes; a profile you'll never forget
  • Colombian coffee – caramel sweetness, subtle nuts, red fruit; a balanced, approachable profile ideal for V60 beginners
  • Guatemalan or Costa Rican coffee – chocolate structure with apple acidity and honey finish; reliable and rewarding for daily brewing
  • Panama Geisha – arguably the most complex coffee profile in the world: jasmine, peach, mango, Earl Grey tea; V60 is the only brewing method that delivers it in full breadth

Roast level: Light to medium roast. Dark roast works, but V60 is optimized for highlighting origin complexity – which dark roasting partially masks with charring, nut, and smoke notes.

Browse our filter coffee selection, where you'll find beans specially selected for V60 and other dripper brewing.


Frequently asked questions (FAQ)

What's the difference between V60 and Chemex?

V60 uses thinner paper filters and allows faster water flow thanks to spiral ribs. The resulting coffee has more body and texture. Chemex with thicker filters captures more oils and produces a cleaner, more delicate cup with greater clarity. V60 gives experienced baristas more control; Chemex is more forgiving for beginners as it tolerates minor technique errors.

Can I use V60 without a scale?

Technically yes, but consistency drops significantly. A 2 g difference in coffee or 20 g in water fundamentally affects the ratio and thus the entire extraction. A digital scale for 15–30 euros is your best investment in coffee quality right after a quality grinder – and with an integrated timer, it frees up both hands during brewing.

Why does my V60 flow too fast or too slow?

Flow rate depends primarily on grind size. Brewing shorter than 2:30 signals too coarse grind – grind finer. Brewing longer than 4:00 indicates too fine grind or clogged filter – grind coarser. Secondary factors: agitation intensity (the more you swirl, the more fines clog the filter) and water temperature (higher temperature slightly speeds flow).

What size V60 should I buy?

For most home use, size 02 is ideal – it covers brewing from one cup to four. Size 01 is designed exclusively for one small cup with limited flexibility. Size 03 suits larger groups or café operations. When in doubt, choose 02.

Ceramic, glass, or plastic – which is best?

Plastic V60 is surprisingly the most consistent: plastic has low thermal conductivity and doesn't draw heat from the slurry, stabilizing extraction temperature. Ceramic is more aesthetic and industrial-looking but requires thorough preheating or it cools the bed. Glass is a compromise – visually attractive, less thermally problematic than ceramic. For travel and consistent home results, most professionals choose plastic.

How often should I change the paper filter?

Each paper filter is used exactly once. Reusing reduces flow – pores are partially clogged with coffee oils and fine particles from the previous brew – and stale, yellowed notes from oxidized residue get into the cup. Quality Hario paper filters are affordable and ensure a clean cup every time.


Summary – your path to the perfect cup

V60 is not just a brewing method – it's an exercise in attention and intentionality. Every parameter you change immediately and without filtering shows up in the cup. And that's what makes V60 exceptional: it offers infinite space for learning, tweaking, and discovery.

Start with Hoffmann's method as your solid foundation. Once you master it to the point of consistently achieving results in the 3:00–3:30 range, begin experimenting: adjust the ratio, try Kasuya's 4:6 method, brew a flash-chilled V60 in summer. And most importantly – taste consciously and record every change. A cup where you know why it tastes the way it does is more valuable than a cup that tastes good by accident.

Everything you need to get started is in one place – from the dripper and filters through a grinder and scale to freshly roasted beans – just choose and start brewing.


Sources

You might also like: Chemex – elegant filtered coffee step by step

← All articles